Protection Strip for KNK Zing / Zing Air / Zing Orbit / KNK Force
Protection (cut) strip for the KNK Zing/Zing Air/Zing Orbit 15/Zing Orbit plotters.
This protection strip, also referred to as a cut strip, fits the following machines:
- KNK Zing
- KNK Zing Air
- KNK Zing orbit (15")
- KNK Zing orbit
- Skycut C-16
Please note. These replacement cut strips do not have an adhesive backing. They simply fit into the cut strip slot with friction. For the best results, it's recommended that you remove any residual adhesive left in the slot from the original or previous cut strip. This can be achieved by using a solvent such as Acetone.
|Dimensions||4 × 4 × .25 in|